Who said that PC’s are dead. I recently bought the parts to make a custom machine, and today I finally built it.
It’s destined to act as a Hyper-V 3.0 server, so that I can run a large bunch of Virtual Machines.
Here’s the spec’s:
And here’s what the Noctua NH-D14-2011 looks like:
It doesn’t come with the model obviously, but her and a review of the Noctua NH-D14-2011 can be found here
I had a real time putting this together, the Noctua NH-D14-2011 wouldn’t fit when the memory ports are fully loaded, part of the Noctua heatsink needed trimming for the right fit, here’s what I hacked off and the tool that helped me get there
Here’s some shots of the profile, showing how I butchered the radiator fins on the heat-sink before it’d sit above the ram
Honestly, don’t try this at home!
It’s currently running Windows Server 2012 RC, running the X.M.P profile which supports the speeds this RAM can run at (2400Mhz)
I used the on-board Intel Rapid Storage Technology Controller to form a RAID 10 using four of the 2TB disks.
Plenty of room for optimisation later on, external RAID controller for better disk performance, overclock that CPU (4Ghz+!) and maybe go for the Intel 6 core instead of the 4 core that’s in there, so there’s a little room for growth if I want to, but this thing is so bad ass I don’t think I’ll upgrade it for a long time!
So you've finally built a gaming pc !
Wise-guy! My gaming PC has a Radeon HD5900 ... I guess she's dated now, but I haven't got a game here that stresses the GPU to be honest (www.tomshardware.com/.../radeon-hd-5970,2474-4.html)
Now thats beast there! good job cutting the cooler :)
Thanks! It took ages I didn't want to be too brutal with the block!
I put the innards of my old case into one of the Fractal cases back in June. They're great. Did have to make a trip down to Maplins though because the ATX 8-pin power connector wouldn't stretch from the PSU to the mobo.
All setup good here for labs now, mini-infrastructure always-on, sweet!
Powered by Zimbra